Results 1 to 2 of 2

Thread: Corn milling problem

  1. #1

    Default Corn milling problem

    Recently , we had a problem in the process in the feed mill , the corn creates a dough after it breaks and it stops at the small pores of the feed mill , we tried changing the pores to a bigger size , the problem is still the same , we deducted it was the corn kernels , what would be the problem exactly ?

  2. #2
    Join Date
    Dec 2015
    NW Iowa


    What is the moisture content of the grain? If it is higher than 18% moisture, this could be a cause of your problem. Also could be the type of corn being milled. Some food grade corns have a softer kernel and the fines might bunch up if ground in a conventional hammer mill.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts